Diesel locos
NCE 102-EU decoder
I installed a NCE decoder on my sd40t-2 athearn HO. I want to have a mars light function. Its a Rio Grande. I have a light only wired to the nose. No other lights. Can someone help with this? whats the CV'S I need? Thanks
Kadee semi-scale couplers vs. Sergents
This is a follow-up to a Weekly Photo Fun thread discussion that started at http://model-railroad-hobbyist.com/node/32447?page=2#comment-322977 and continued on concerning the merits of Sergent couplers vs. Kadee semi-scale. Since we were straying from the intent of that thread, I thought I'd start a new topic. See first reply below.
Con-Cor MP-15
I recently purchased a Con-Cor EMD MP-15 (DC) locomotive. The locomotive ran pretty well right out of the box but was rather noisy. The documentation said that it was lubed at the factory but greasing it with LaBelle grease made a big difference in the running characteristics.
1st Annual Bridgetown Prototype Modelers Meet
Feb. 10, 2018 had the first Portland Prototype Modelers meet. Over 100 people attended the event, and shared a variety of models. Below the first post, I will add some pictures taken off the Bridgetown Railroad Modelers Page.
If you attended feel free to add your pictures.
Craig
Captive Audience
You ever had that locomotive that when you found a picture of it, you were captivated by it's look and it's history. While doing research on the Texas Mexican Railway, I found a locomotive that did just what I have described.
DCC Test Track Wiring Question.
I have a question for those with more DCC and electrical/electronic experience then I have.
I have a NCE powercab that I would like to connect to my program track on my modelbench.
Also I have the NCE USB interface I would like to use so that I can download and use JMRI for programming.
And also I would like to set up the Soundtraxx PTB-100 .
DCC Sound install in a Bachmann GP30
After attending the Amhearst Hobby Show and finding a few good deals (this is one of them) on sound decoders, I will install one in a Bachmann GP30 that was originally DCC only. This is a straightforward install and although it is somewhat step by step, I see it as an overview on how I do it. This enging was one of those purchases I made when I was just getting into DCC. The engine always runs very well but I knew that a quality decoder would make a difference. Just getting around to it now and I hope to show how I do it!
SD-40-2 Grab Irons?
Hello,
I'm detailing a SD-40-2 and need some help.What is the correct size for grab irons? 17" 18" or 24"
What’s on your workbench?
I’m starting to think about home. What is on my workbench? Cleaned up before leaving.... Gotta rely on your pictures and thoughts!!!
Let’s go!!! Have a good!!!
>> Posts index
Navigation
Journals/Blogs
Recent Blog posts: