Track and electrical/DCC
Connecting Keep Alive to Rivarossi U25C
Has anyone successfully attached a Keep Alive to a Rivarossi U25C motherboard? I attached the Blue wire to pin 16 and the black wire to pin 20 following the drawings on sbs4dcc.com. The Keep Alive does not activate even after several minutes. Am I missing something?

Mineral Spirits for track cleaning
I recall some very high recommendations for using mineral spirits for cleaning track (prior to any other coatings).
I picked some up the other day while in Walmart. When I went to use for cleaning something else it came out in a milky white color.
Is that really mineral spirits? I read the label and it appears to be one of those new fangled mixtures to protect ourselves.
Does anyone know if it is as effective as the old stuff??

Stacked LED's for Turnout Indicators
Just wonder if something like these 'stacked LED's' could be used to indicated turnout setting,...maybe out near the turnout itself?? cheap enough
https://s3-us-west-2.amazonaws.com/mrhpub.com/2015-01-jan/online/index.html?page=58
https://www.allelectronics.com/mas_assets/cache/image/5/4/f/0/21744.Jpg

Atlas Gold Loksound Select headlight problems
I acquired a clearly used Atlas Golf GP-38 with a Loksound Select decoder. When I run it, everything works ok except the front headlight blinks about once per second when in reverse and doesn't work at all when going forward. Rear headlight works fine as it is on when in reverse and off when in forward. Before I go for the CV8 = 8 solution anyone have any suggestions as to why this is happening that I can fix with JMRI? I don't have a Lokprogrammer.

Staggered Gaps in Track, between power districts & reverser zones
I know that it is generally accepted that gaps in the tracks be staggered to some degree,...for both power districts and reverse zones. But how little, 0R how much is acceptable?? Is 1/2" acceptable between power districts??

CN Mainline Continuous Point Switch
I’ve been meaning to get photos of this turnout for a long time. A while back I was debating point lengths on various hinge point turnouts. Well here is one that has no hinge! I can confirm as I walked every inch of it about four times. And gaps that ever did exist have been welded. CN line along Grandview Highway in Vancouver at Kaslo Street. Just west of Central Hobbies. The switch is behind me in this shot.

JMRI WiFi Throttle Help
I have an issue I hope someone else might have an answer to. I just finished installing a TCS Wow sound decoder in an Atlas Classic RS-1. It runs and sounds great, with one exception. I run a JMRI WiThrottle server, and my app will not control the engine. It controls the functions, but not the motor. The app runs every other engine I’ve tested, so I don’t think it’s that, but the RS-1 will only run with my NCE throttle. Anyone else run into this?

Iphone camera, could it be taken out of phone
there is no doubt that cell phone cameras are these days can take great photos. Most of my photos I take for forums and even for publication are taken with my Iphone camera. The nice thing about a cell phone is that you can get it into areas that a camera can't, but you can't get it into all places. Inside a cell phone the actual camera is tiny and it plugs into the phone with a small cable. could an older phone be dedicated to just taking photos, and could the camera be removed and an extension cable be made to allow the actual little camera be placed on the
Glue or epoxy with electrical conduit
Is there a glue or epoxy that acts as an electrical conduit other than solder
Source for wire
Has anyone gotten wire recently? I was looking for 14 gauge stranded bus wire, and Powerwerx has some really nice high quality wire, but it's about 30 cents/foot, whereas Amazon has wire for about 14 cents/foot, BUT the Amazon stuff has VERY mixed reviews. I'm getting more and more leery of Amazon stuff, as a lot of it is either off-brand or counterfeit.
>> Posts index

Navigation
Journals/Blogs
Recent Blog posts: