Locos and rolling stock

NP Green Paint Match?

Wed, 2019-01-09 13:32 — Craig Townsend

I need help color matching this NP boxcar green. It doesn't have to be an exact match as I will be doing some weathering, but I need to plug the holes from removing the roofwalk, and shortening the ladders along with removing the yellow strip on the door. 

Any suggestions on what color(s) to use? I looked at the MRH paint guide and came up with: dark green, coach green, pullman green, or maybe CN green?

lolke's picture

Split/broken gear - how to find replacement

Wed, 2019-01-09 08:57 — lolke

I just bought a used/second hand brass model of a Norwegian electric. The model is as new but it doesn't run. I opened one of the gear boxes and the top gear is split. See picture for the actual gear. It is a 16 tooth gear. I reached out to the manufacturer but in the mean time I want to see whether I could use a NWSL replacement gear but how we would I find the right size? What do I all need to measure?

Any thoughts?

Regards,

Plans Wanted for Ambroid original B&M Snowplow

Mon, 2019-01-07 13:55 — abelida

For too many years, I've been sitting on an ancient Ambroid B&M snowplow kit, semi-assembled (the original, not the winged). Can't remember when I got it or when I started work on it but I do know when I got it, Ambroid was still in business. I got it out (it's winter after all) and thought to restarting. But I no longer have the plans, can't find them anywhere.

Anyone out there have them and can share? I can wing it but I'd be most appreciative. 

Alex

brass caboose occasionally shorts out

Fri, 2019-01-04 18:32 — mark_h_charles

I have a brass caboose that was beautifully painted by a previous owner. My problem is that it occasionally shorts out, causing the DCC system to reset. This is annoying.

A friend suggested I brush "Liquid Electrical Tape" on the underframe any place where the wheels might touch - center sill and inside of steps.

Does this seem like a good idea?

Acuransx15's picture

What's the Best Way to Clean Brass Locomotives?

Tue, 2019-01-01 18:53 — Acuransx15

I received a very nice brass steam locomotive from a special friend a few years ago for Christmas. It's an LIRR-inspired G-5 4-6-0 and it's the first brass engine I've ever owned. Therefore, I am ignorant to the type of maintenance it requires and am rather apprehensive to jump into any type of service project without some community advice.

Chuck P's picture

Quonset Hut Diesel from 1960

Mon, 2018-12-31 08:03 — Chuck P

Was looking through some old RMCs from 1960. This kitbashed diesel was shown.

kirkifer's picture

New parts for Walthers Mainline Engine

Sat, 2018-12-29 19:33 — kirkifer

Does anyone know where I can buy a new drive shaft for a Walther's Mainline Dash 8-40C ?  Their design has some tiny tabs that fit onto a U joint and when one of the tabs break, you end up with an engine that doesn't run...

ChuckG-EDO's picture

Source for custom weights for models?

Sat, 2018-12-29 11:50 — ChuckG-EDO

We're working on a caboose kit and need a source for weights that we can put inside the car on the floor. Does anyone know of a source for flat weights similar to what we're looking for?

DCC Conversion

Fri, 2018-12-28 11:57 — emdsd9

I need thoughts and opinions.

I'm finally starting a layout (at age 73). I have 5 LifeLike Proto 2000 SD9s that I'd like to put sound decoders in. These are old units purchade in the 90s. They are not DCC ready. Do I bother to install a socket or plan on hardwiring the decoders? Speakers in the fuel tanks? I'm thinking of going with TCS units as they seem reasonably priced. I don't need the best and latest. Replace the gears? With Athearn or NWSL?

Thanks in advance


>> Posts index Syndicate content


Navigation

Journals/Blogs

Recent Blog posts: