Just finished laying track on my 12’ x 2’ switching layout and getting ready to wire, weather and ballast the track.  Had to add an 8” section of track to cross the joint of the two 6’ modules and move the switch further forward.  Atlas #6 turnouts used for the entire layout.  I also decided to stretch the top industry track to the end on both sides of the modules.  I used two window latches to join the two sections, which worked out better than expected.  It will be part of a larger layout in the future.

January was a rough month to start the year off with and I'm ready for work this month, albeit a few hours early. That extra day on the end will certainly make a difference! Let's see what you've got.

So now that the benchwork is roughed in, I need to address the skyboard situation. I figure it will be easier to work on these before the door slabs are fastened down so now’s the time.

Construction of my SP Lordsburg Sub has begun! My first (of four) stud walls went up yesterday. The first view is standing in the doorway looking in and the second is from the opposite corner of the room looking back to the entrance.

Photos in the next post.