..."No, it's Iowa."  Finally time to start adding some of my own "Fields of Dreams".

I am busy building a Juneco Models Cartierville station kit for the Cornhill & Atherton RR

There are a lot of detailed castings supplied with the kit, but I am at a loss as to what one item is.

See below sitting on the platform – looks like 2 oil drums mounted on a frame, one with a basket on top and a coffee pot sitting in between.

Hi.

I am about to start making a static grass applicator using a positive ion generator that I have. I understand the electronics and the mechanics of making the applicator but don't know how the mesh size relates to the fibres length. What would be the recomended mesh size for say 2, 5, 7 and 10 mm fibres? I will be able to make more than one mesh so would like to match mesh to fibres.

Chris Waring.

Well today was able to work a bit more on the coal loader this morning. Having a few issues with the directions though. It says after gluing the four corner braces in place to "drill #76 holes, pre-paint large N/B/W casting and glue in place." . What the heck is a N/B/W ? The parts list, lists all castings as the metal bits none are N/B/W. the plastic parts do list N/B/W, but the only bit I see is the flood light shade. I'll press on with assembly, sure to figure it out later. I can a least follow mostly with the drawings.