Hey guys. I picked this engine up secondhand at the Birmingham show a while back and finally got around having a dcc chip in it. I've been spending today breaking it in, but now that I'm starting to get into the lawer speed ranges I'm starting to hear a bit of whining from the mechanisim. Assuming I can get the shell off, what do I need to do to get rid of the squeal? Thanks in advance,

    Jacob.

I have started to measure and cut the styrene sheet that will become the concrete pads that will form the Intermodal Yard.
 

Starting to add the details to the Firehouse.

Hopefully I got the diagrams to stick.

Rail laid and glued, terminal wires in place and channels cut to hide them. Scene temporarily attached to layout and powered and tested. All track and turnouts working great, no shorts or dead spots. Engine easily pulls/pushes cars in/out of the intermodal yard from the mainline. Next step, laying rails for overhead gantry crane and building concrete pads.