• Quad Servo DCC Decoder – Arduino Software Update

• Quad Servo DCC Decoder – Improved Version

• A-Track – Transfer to new server forces update

• A-Track - Support for NCE DCC Systems - Updated

When setting up your servos with the Quad Servo DCC Decoder (see https://model-railroad-hobbyist.com/node/42087 for details), if the servo stalls against an endstop for an appreciable time then you may notice that the heatsink attached to the voltage regulator gets rather hot and, in extreme cases, this can cause the regulator and the QSDD to shut down.

Following a number of comments from modellers who built Quad Servo DCC Decoders (QSDD), as published in the February and March 2020 issues of MRH Magazine, an improved version is now available.

Following the disruption to my website caused by the service provider transferring it to a new server, it has been necessary to update A-Track to handle the new server file access rules. Any MRH reader who is running a previous version is recommended to download this update. As always, all of your current settings and files will be preserved when you install the update.

A-TRACK Version 4.4.3 has now been released – and is still completely FREE !

This announcement about A-Track, a FREE easy-to-use software application for NCE DCC systems, is posted with the generous permission of Joe Fugate, in the hope that some of the MRH community may find it useful. Any comments or queries are very welcome.

A-TRACK Version 4.4.206 has now been released

This announcement about A-Track, a free easy-to-use software application for NCE DCC systems, is posted with the generous permission of Joe Fugate, in the hope that some of the MRH community may find it useful. Any comments or queries are very welcome.

A-TRACK Version 4.4.1 has now been released – and is still FREE !

A-TRACK Version 4.3.2 is now available and still FREE !

A-Track runs on any Windows desktop or notebook to complement and expand the capabilities of your NCE Power Cab or Power Pro DCC system, and to assist you in running your roster of locomotives on your model railroad.

Unfortunately, a number of users (and potential users) of A-Track have reported a couple of problems with Version 4.3 of the program, as released last November. Neither of these annoying problems affects the main functions of A-Track (helping you use your NCE DCC system), and they can be fixed fairly easily, as detailed in the following workarounds.

Version 4.3 is now available and still FREE !

A-Track runs on any Windows desktop or notebook to complement and expand the capabilities of your NCE Power Cab or Power Pro DCC system, and to assist you in running your roster of locomotives on your model railroad.