williamgoetz's blog

JMRI Throttle Looses Control

I am using JMRI with an Arduino Uno to run my layout.(Very early stages) I have a test loco that I am using with a Digitrax DH26 decoder. Everything seemed fine for about a month and all of a sudden the throttle refuses to control the loco. I am able to start the loco, but it runs at constant speed and using the throttle has no effect on speed, stopping or change of direction, I have to actually power-down everything to get the loco to stop. Any help would be appreciated.


>> Posts index Syndicate content


Journals/Blogs

Recent Blog posts: