Yannis

Hello everyone,

Following some work i finally got the backdrop finished on the Pasadena subdivision. Since this is a disposable backdrop (wont survive a move most probably), i went for a lighter construction. It is made using EPS foam (30mm) and PVC sheets for the coved corners. Painted with acrylic house paint mostly.

Finished photo here, in progress photos to follow on the next post. The photo below represents the view of the San Gabriel mountains as seen from the Colorado boulevard. A multitude of buildings will occupy the empty plywood. The sloppy demarcation line where the backdrop meets the plywood is intentional since a different layer/horizon will occupy this spot.

I hope you like it, thanks in advance for your time and replies.

opFinal1.jpg 

 

Read my blog

Reply 0
Yannis

In progress photos

Here is where i started. Gluing the PVC sheets on the corners.

ackdrop0.jpg 

Gluing the EPS foam sheets together. When the glue dried, drywall fiberglass mesh tape was applied over the joints. Where the PVC sheet was lap joined onto the EPS sheet, the mesh tape was applied next to the step that has been created in order to help making up a ramp when puttying the area.

ackdrop1.jpg 

ackdrop2.jpg 

ackdrop3.jpg 

Onto the next post.

Reply 0
Yannis

Sanding & Priming

Sanding and priming the backdrop

ackdrop4.jpg 

ackdrop5.jpg 

ackdrop6.jpg 

Reply 0
Yannis

Painting

ackdrop7.jpg 

ackdrop8.jpg 

 

Reply 0
Yannis

Painting the mountains

Going for a specific hue here...

ackdrop9.jpg ckdrop10.jpg 

ckdrop11.jpg 

ckdrop12.jpg 

Reply 0
RossA

Nicely done!

Yannis,

Lovely mountains, a beautiful backdrop that enhances the illusion of distance but will not take a viewers focus from the foreground models. 

Great job!

Ross A

Reply 0
Yannis

Thank you Ross!

I am glad to have captured what you mention!!! Much appreciated feedback!

Reply 0
Rick Sutton

On the button!

Yannis,

That’s really nice work. The colors you have chosen are beautiful (that’s not as easy to do as it sounds) and your painting captures the look and feel of that area. Thanks for taking the time to document and share your methods.

I’m going to follow your build with great interest.....I think we have a good’un going here.

Reply 0
Yannis

Thank you very much Rick for

Thank you very much Rick for the kind words, they are both encouraging and motivating!

I did custom mix all the colors going for a brownish mauve / gray on the mountains based on photos of the prototype. Then i added a filter of atmospheric haze over the mountain with the airbrush.

My next backdrop step is to add a more-foreground layer of buildings/trees/horizon details and of-course the various road crossings from 3d to 2d.

Will keep you posted soon.

 

Reply 0
Nevin W. Wilson NevinW

Looking good!

I think you have captured what southern California mountains look like.  Very nice.  

Modeling the Maryland Midland Railroad circa 2006

Read My Blog

 

Reply 0
Jefffluke

Great Job!

Having grown up in the  shadow of the S.G. Mountains, I can tell you that you’ve nailed the unique hue of the mountains, they look great- including Mt. Wilson! I look forward to following your build, thanks for posting!

jeff

Reply 0
Yannis

Many Thanks Jeff!

Jeff, your feedback as a local of the area means a lot! Many thanks for the kind words.

Reply 0
Deemiorgos

Wow! you're on a roll Yannis;

Wow! you're on a roll Yannis; looking good.

Reply 0
Yannis

Thanks Deemiorgos!

Moved back to the woodwork in order to finish up staging and the swing-gate.

Reply 0
Reply