richhard444

Here are pictures of what I have been working on for the town of Watersmeet. The basic road coming out of Ironwood.02192(1).JPG 

The road leading from Ironwood to Watersmeet.02197(1).JPG 

The road as it looks now, with the scenery added. Still have a little detailing to do such as road signs. Adding the cars etc.P6292740.JPG 

The scenery, I will be putting a purchased photo mounted on a backer board in the window well behind the little hill. It is about 6" wide and will be 18" - 24" tall. I am going to use a fall color wooded scene.P6292741.JPG 

P6292742.JPG 

I am debating what to have this area be - maybe a small park with trees, picnic tables etc. or maybe a small country store with gas pumps. Walthers as just come out with one that would fit into this area.P6292745.JPG 

Road coming out of Ironwood.P6292746.JPG 

P6292747.JPG 

This is the basic foot print of Watersmeet, approx. 36" wide x 52" long

P6292744.JPG 

Richard

 

 

Richard - Superintendent CNW Peninsula Div.

blog - https://mrhmag.com/blog/richard_harden

Reply 0
Detroit_RR

Looks great

I think it looks great.
Cheers, Andy Relative newbie to the hobby. Detroit area, any others!?
Reply 0
richhard444

Update on Watersmeet

Thanks Andy,

I am in the Detroit area, out in White Lake.

Richard

Richard - Superintendent CNW Peninsula Div.

blog - https://mrhmag.com/blog/richard_harden

Reply 0
avrinnscale

Looking good!

I especially like the work you've done on backdrops and the roadway.  What did you do to make the roads?

As a risk manager, I'm always a bit fearful when a park is put into the middle of a wye.  The town would be heartbroken if a child was injured by a train.  It might be a good area for a small industry, like a fuel dealer or lumber yard.

Geof

  http://lyndonvillesubinnscale.blogspot.com/

Geof Smith

Modeling northern New England in N scale. 

Reply 0
richhard444

Park or General Store

Hey Geof,

I agree with you and I am going to get and install the Walthers "Country Store" #933-3491. I think it will be a nice addition to this area. The size is just perfect. Also will provide a fuel stop for people traveling this road. The road is made with .060 styrene cut to scale 22' wide (3" actual). If you look at my past blog posts you can see how I have built the roads all over my layout.

Richard

Richard - Superintendent CNW Peninsula Div.

blog - https://mrhmag.com/blog/richard_harden

Reply 0
Nike jefe

Love your backdrop! Jeff

Love your backdrop!

Jeff

Reply 0
VE7KKQ

Photo #3 and #7

Not a criticism, the photos are a catalyst for this question.

Why do model railroaders put so much time and effort into the details of their layout to make it as close to reality yet when it comes to modeling roads, the result is something so way out of proportion, like inclines in roadways?

John

Reply 0
richhard444

INCLINES

Hey John,

I agree that the incline is a little steep (it is at 17 deg. from horizontal) but due to space restrictions I had to do it this way to be able to have any length to the flat road between towns. But also remember that this is only to represent a real life situation and not a real road, I think that after the rest of the scenery is in place and the buildings put back in it may not be so noticeable. But to you and all the rest of the responders thanks for the comments.

Richard

Richard - Superintendent CNW Peninsula Div.

blog - https://mrhmag.com/blog/richard_harden

Reply 0
Oztrainz

Steep grade on road

Hi Richard,

17 degrees works out at at roughly 30 percent or 1 in 3. This is about as steep with rubber on tarmac as you could go without  4-wheel drive. Your transmission and/or clutch would want to be in good order. Any slippage and you ain't gonna make it up to the top. Locally we have one stretch of suburban street that is that steep and the view from the top is is seriously scary.  

A suggestion - make a feature of it with signs top and bottom "Steep Grade" and "Trucks Must Engage Low Gear" and maybe even warning lights. 

Regards,

John Garaty

Unanderra in oz

Read my Blog

Reply 0
Reply