Ordered some boxes from Bill for parts and got two different sizes. They arrived in a flat small package very quickly and in the last couple days finally got assembled. I didn't look at the directions but did a dry run before gluing the parts together. My work surface is an old set of architectural drawings, a bottle of white glue, some painters tape, and rubber bands. 

 u

  The middle sections were placed first with a little glue on the mating surfaces - not the tabs. I just make a puddle of glue and use my finger. A little tape and a rubber band held things together overnight. 

The "feet" to allow the boxes to stack gave me an idea to make a lid so cut some similar ply wood to match.

 L 

The engraving on the ends is for "Umauma Railway & Navigation Co."  Very neat.

Thanks Bill for making a nice product!

Neil Erickson