Don Mitchell donm

The SMR has gone without a permanent paint booth for many decades.  That has changed since my wife and I have started cleaning out the stuff we've accumulated over the past many years.  That will save our heirs from just having to dump things.  More pertinent to the SMR, it has opened up space for a permanent temporary paint booth.

The attached photo tells the story.  On the right is the cut-up cardboard box that was the latest of those used for air brushing.  Simple, and easy to put up on a stool or even on the layout for use.  The lack of ventilation may seem alarming, but a change was made to acrylic paints as soon as they first came out.  Consultation with an industrial hygienist determined that a dust mask or similar would provide adequate protection.  (Solvent spraying with cans is still done outdoors in the generally year round sunny clime of the "Sandy Eggo" area.)

On the left is the new permanent temporary phone booth.  It was manufactured to fold up for storage, but has now found a permanent location on one end of a door converted to a table.  It has a fan that draws paint mist through a furnace filter, but I'll still be wearing a mask -- most likely an N95 type from our collection being used to meet Covid restrictions.  It also has a plexiglass top window for lighting.  A surplus fluorescent work lamp suffices for now; eventually it will be replaced by leds. 

Now to use it -- likely sometime after an "atmospheric river" storm passes by "sunny" Sandy Eggo early next week.

0booths.jpeg 

Don Mitchell

R%20logo.jpg
Read my blog

Reply 0
Rick Sutton

Way to go Don!

Looks like a real improvement!

Reply 0
laming

Portable Paint Booth...

I had a huge Pasche double fan, professional grade paint booth that I used maybe twice. It was heavy, cumbersome, and totally terrible for a "set up and paint, clean up and put it away" situation. The frickin' thing was huge:

100_1518.JPG 

Tried unsuccessfully to sell it a few occasions. This past summer I said "Enough" and literally gave it away while on the way to the dump with it.

Replaced it with the OP's "Paint booth in a suitcase" approach. I think it is a wise decision. I'm looking forward to trying it out.

Andre

 

 

 

 

Kansas City & Gulf: Ozark Subdivision, Autumn of 1964
 
The "Mainline To The Gulf!"
Reply 0
BR GP30 2300

Paint Booth

I built this paint booth 2 years ago, 1 x 2 lumber and 1/8" masonite.

th%20109.jpg 

Reply 0
UglyK5

I think you will like it!

Hey DonM - looks like a big improvement for sure, I have a very similar (maybe same) unit and I love it. Mounted on a rolling cart with paint gear on lower shelves.  If you have a fixed home for it that will be nice too.  

Have fun!

jeff
 

820b30c.jpeg 

—————————————
“Think before you post, try to be positive, and you do not always have to give your opinion.....”
-Bessemer Bob
Reply 0
AJKleipass

Upcycling

I up-cycled my booth from a number of materials, including an old kitchen sink base cabinet ($25 at Habitat for Humanity resale store). Probably cost me $500 for everything, including the compressor and fittings. The paint racks are foamcore boards recycled from some foamcore layout modules I experimented with a few years ago from a forum poster's article.

 

356653_n.jpg 

AJ Kleipass

Proto-freelance modeling the Tri-State System c.1942
The layout is based upon the operations of the Delaware Valley Railway,
the New York, Susquehanna & Western, the Wilkes-Barre & Eastern,
the Middletown & Unionville, and the New York, Ontario & Western.

 

Reply 0
Richard Bale

Please Contact

Don Mitchell...

Please contact me at rhbale(at)aol(dot)com

Thank you.

Richard Bale

Reply 0
Reply