the MRH Forum

Dalee Electronics Yard Master and block wiring Track and electrical/DCC
Reply
Regular poster 222 posts kh25 Regular poster 222 posts
kh25

Ok so how does one wire a dalee yardmaster to be used with dc block wiring?I would to engine 1 parked while using engine2.the yardmaster is connectedro a tech 2 and I would be using an atlas selector switch for block control.  
Mark Kingsbury
Reply 0
Prof_Klyzlr Moderator 7,957 posts
Prof_Klyzlr

Start with a trackplan

Dear kh,

Any chance of a trackplan, so we know what we're looking-at?
The Basics of DC-Block wiring are pretty simple,
but any advice will be more-properly usable/relevant and specific if we're working with the actual track array...

Happy Modelling,
Aim to Improve,
Prof Klyzlr
Reply 0
kh25 Regular poster 222 posts
kh25

Ok I will post one tonight

Ok I will post one tonight
Mark Kingsbury
Reply 0
kh25 Regular poster 222 posts
kh25

Yard master

Ok I figured out how to wire the dalee yard master for block control.the 2 wires designated for ac gets connected to the power pack ac terminals. The other 2 wires are track wires one goes from the controller directly to the common rail . The other wire connects the yard master to the atlas selector. Then continue block wiring

 
Mark Kingsbury
Reply 0
Reply