maybe

I have used several dozen of those in the past.. was wondering when the supply would dry up. That said, I may get one of the iphone 7/8 replacement speakers to try.. If anyone has tried them , how are they? They are pretty small and cost a couple bucks including shipping..fyi

That's an earpiece speaker,

That's an earpiece speaker, not the "loudspeaker" that's illustrated above in the previous post. Whole different animal, and it has very VERY fine springs for contact on the side not shown. The earpiece speaker is roughly 15mm square, and 3mm thick, with a single port roughly 2 x 5 mm in the middle of the side not shown.  It's designed to be heard about an inch from your ear. It's not likely to prove very useful, unless you know the formulas and can design a Bose-like sound horn enclosure and 3d print it.

Part pf my job used to be cell phone repair.

Nice sale

@barr

Thanks ! that saved me a bit there..lol  There are some other pieces I was thinking about, but I probably should pay closer attention..thanks again

"I have several of these

   I have 2 in my S scale diesel , they fit side by side up on the top of the shell with the sound firing down thru the truck mount spaces. They sound quite nice driven by a 2 amp Econami decoder....DaveB 

I normally

I normally keep around twenty or so of the buzzer speakers in my storage bin. I never buy less than twenty when I order, but as Bill said, the sources are drying up.

My fall back so far has been the ESU 50321 LokSound Sugar Cube Speaker, but they are much higher priced and I can’t afford to buy in bulk.

So Bill, and others, where do we go from here? I would like to find something of the size and sound quality of the ESU 50321, but currently I don’t know what to try. I need to go back and review the speaker testing thread.

Enclosures are going to be a problem also.

No problem

Dear Tim,

Not a problem, solve both speaker-driver + enclosure issues with the offerings from ScaleSoundSystems.com...

Happy Modelling,
Aim to Improve,
Prof Klyzlr

Trouble ordering

I followed your provided link but could not find out how to put a ten pack in a shopping cart?

Indeed

ScaleSounds is a completely different level than the iPhone speakers and he'll custom make them to fit your particular loco.  Once I installed my first one it became clear I couldn't go back to anything else.

@Brian

contact me directly at billy@pdc.ca and I'll hook you up.

iPhone 8 Earpiece speaker works fine

I got a few of these for $1.20 each and tried them. They work fine, maybe not as great as the ESU but I'm still playing with enclosures. Just by itself it seems to use the shell as an enclosure to some effect. But saving a few bucks on the total cost would not be worth it if the sound quality suffers too much. Still playing...

OEM Earpiece Ear Piece Sound Speaker Replacement Parts For Apple iPhone 8 4.7"

Done deal!

Ordered 10 pack!  Thanks Bill!

what's left?

Boy these are popular today!

I have had a steady stream of orders for these speakers today and as of right now, I have four 10 packs and four 4 packs left. When these are gone, that will be the end of my stock.

Thanks MRH friends for your support!

@joef

First off, I don’t mean to hijack this thread, but maybe Joe, you can point me in the proper direction since it is your layout in the video. What is the method that you use to throw switches with the dead-bolt? I’d like to learn more about that!

PDC.CA- bought two 10 packs, thank you! Your sale and the need for speakers for some engines coincided. Like it was meant to be. Haha

You have one less 10 pack now

And another set of AML decals is headed south too.

Now to dig out the installation articles for when these get here.

just a few lest

There is one 10 pack and two 4 packs left.

SOLD OUT!

Thanks Everyone!

Not sure how turnout throws got into this thread

Got a ten pack b4 gone