This is an annotated video slide show of the first two parts of the Main Street Bridge Project at Union Station on the N-Scale ATSF Paradigm Division. The overall project was designed using photos of the actual bridge at the Kansas City Union Station obtained from both Dr. Nick Muff and searches on the internet.

The modeled structure was modified to fit the available area as well as any of the other mods that I have made to the Union Station area.  The model was test fit numerous times (shown in the video) with parts being modified as needed and re-printed on my daVinci mini 3-D printer (has almost 1000 hours of printing time in the past year plus).

Part 1 shows the design of a lot, if not all, of the parts that were required for the model and printed on my 3-D printer. Part 2 shows the assembly and test fitting of the bridge structure onto the layout.  The bridge is 30 inches long and 3.56 inches wide (762 mm x 89 mm).  The roadway decking is 2.7 inches wide (69 mm) with a 0.39 inch wide sidewalk (10 mm) on each side. Parts 3 & 4 will be coming soon....so stay tuned…..John

My YouTube Channel is -  https://www.youtube.com/user/tanzj