Deemiorgos

I am having no luck trying to find a 1/4" I.D. bronze shoulder bearing like this in Canada.

aring(2).jpg 

No Home Depot carries them in Canada, but they do in the US, but won't sell/ship one to me or the store.

Any ideas on where I can find one would be much appreciated.

I used this on the last turntable I put together, which I regrettably sold years ago.

 

 

Reply 0
DrJolS

Lowe's

Did you try Lowe's in Canada? They show what looks like your part on the US website.

 

DrJolS 

Reply 0
AndreChapelon

Parts is parts

Did you try Lowe's in Canada? They show what looks like your part on the US website.

They show the part on the Canadian website too:

https://www.lowes.ca/washers-gaskets/the-hillman-group-bronze-standard-sae-flange-bearing_g1578892.html

Then there's http://www.globalindustrial.ca/g/motors/bearings/sleeve-bearings/powdered-metal-bronze-sae841-flange-bearings-inch-type-ef-106052

Mike

and, to crown their disgraceful proceedings and add insult to injury, they threw me over the Niagara Falls, and I got wet.

From Mark Twain's short story "Niagara"

Reply 0
Bernd

McMaster Carr

They might ship to Canada. http://www.mcmaster.com/#bronze-sleeve-bearings/=16a2ebg

Here's a few more.

Catalog:  http://www.mscdirect.com/browse/tn/Motion-Control-Fluid-Power/Sleeve-Bearings?searchterm=bronze+bushings&navid=4287924442

On Line Store on E-bay: http://www.atlasbronze.com/BUSHINGS_BEARINGS_s/1836.htm

Just do a Google on "bronze bushing" you'll come up with a ll sorts of resources. You might even find one in Canada.

Bernd

New York, Vermont & Northern Rwy. - Route of the Black Diamonds - NCSWIC

Reply 0
Deemiorgos

Thank yiou all. I checked

Thank you all.

I checked Lowes and they have a few in stock, Will go tomorrow night to see if they have smaller ones.

Global industrial only sells bags of them; not individually.

Tonight I'm going to look into Bernd's suggestions.

Reply 0
Deemiorgos

I found two at Lowes and they

I found two at Lowes and they only had three in stock! Phew!

Reply 0
Reply