lLast night finished assy of hoist by putting flywheel and handle on. needs a bit of touch up paint.

Cut out corner brackets. Your supposed to cut them from the instruction drawing, but I made a copy and cut them out. Then make pin holes where the bolts go.

Painted them up with pavement black.

Glued in place with some tacky glue. Used a pin in the bolt holes so I'd have a bit guide to drill. Also showing one of the bolts in my tweezers. I would just dip the tip in some glue and slide them in.

Image of bolt detail. 32 of these to put in. Standby for future updates.