Yesterday I assembled window sashes & the glazing, and this morning I did some wall assembly.

First image showing parts for windows and doors. The long windows have two pieces, the upper sash with a small frame where the bottom sash mounts, and the bottom sash. the parts have adhesive backs so it's peel n stick. I suggest assembling the two sash parts first then add the glazing.

Then they are pressed in from the back side flush with the inside of the wall. I then put a small dab of canopy glue on each corner to secure.

View from outside.

Next image shows one side done.

Image of front with doors laid in place. Doors are peel n stick also.

Lets put some walls up now. First wall tacked in place. I used the lines on my cutting mat to keep things a square as possible.

Rear and other side wall tacked in place.

A view from above. I'll have to do some paint touch up on the corners, but it's looking good so far.

Hope you enjoyed this portion, next is roof panels, but I'm waiting on the smoke jacks to come in the mail and want them on hand before proceeding.