ALPS 50k Vertical Pot, Mouser

ALPS 50k Vertical Pot, Mouser P/N 688-RK09L1140A5P

Have a look at this thread on the digitrax Yahoo group.

http://dir.groups.yahoo.com/neo/groups/Digitrax/conversations/topics/172324

Peter - Thank you for your

Dear Bruce, Um, I can see a

Dear Bruce,

Um, I can see a Part Number (P/N) in Peter's post

Mouser P/N 688-RK09L1140A5P

which leads me to

http://www.mouser.com

and to this

http://au.mouser.com/ProductDetail/ALPS/RK09L1140A5P/?qs=%2fha2pyFadujEstLVTsXcZkBBa78mGJmZvc2sGz3U2XnQcRpHiymLzg%3d%3d

Data sheets and Specs available on that same page...

Happy Modelling,
Aim to Improve,
Prof Klyzlr

I gave the part #

Bruce,

I gave the part number. In the link you needed to look through the whole thread for other comments on the replacement.

Try message #172371

http://groups.yahoo.com/neo/groups/Digitrax/conversations/messages/172371

Alas, for those of us who

It's the newfangled Yahoo! Neo interface

Bruce,

The new Neo interface of Yahoo! Groups by default seems to show only the first and last message, completely hiding any other messages in the thread. Very annoying. I found that if you go to the top right hand side of the first message's header, you will find a 'view' button with a down-arrow. If you click on the down-arrow an 'expand messages' option appears. Click on that option and all messages will appear and expand.

If you are looking for headers/subject lines of the messages in between the first and last to appear only (when not fully expanded), find the line with the 'up and down' arrows + 'X more messages' count located in between the first and last message displayed. Click on the down-arrow to the right of the 'X more messages' count, and headers/subject lines of all the in between messages will show.