Making ME code 55 curve

Making ME code 55 curve accurately can be done with a Micro-Trains gauge as well, as long as the arc of the curve also is accurately made with a trammel on the subroadbed for a reference.

Keep working the MT gauge carefully between the rails as you form the curve.

Curving ME Track

I suppose that is one way to do it, but it looks harder than using Fast Tracks sweeps, which I really like. I've heard that Micro Engineering track was hard to bend, but I haven't had any trouble bending it. I do mine by working it  close to what I want by hand on a flat surface, then using the sweep sticks to finish out the curve. The secret to bending ME track by whatever method is to lay it on a flat surface to bend it and to take your time.

I have found when bending or

I have found when bending or adjusting ME track my thumb gets torn up from the sharp edge of the ties (if I am doing a lot) 

So I ordered some very very thin cotton gloves used by museums to protect objects from the oils of human hands when being handled.  They cane in a big pack (they are basically disposable). And I put one on the hand I use to bend or adjust the track and my thumb does not end up with a bunch of scratches on it or otherwise worn sore.

-Doug M

Jim said: "The secret to

Jim said: "The secret to bending ME track by whatever method is to lay it on a flat surface to bend it and to take your time." 

Yes, and the results are worth the effort. ME stays in "curve" and looks better to my eye than competitors track. Never used Peco HO flex track, so I cannot say how its ease of installation compares to ME HO flex. Curious if others have.

Good tip from Doug M. too.